Airlink101 AR410W Manual do Utilizador

Quick Installation GuideModel # AR410WVer. 1A

Step 8f For L2TP, enter the values provided by your ISP and click Next.Step 9 Choose to Enable or Disable the wireless function of the router. Click N

Step 10 Click Restart to apply the settings.Step 11 Click Close and close the web browser.

Section 4Verifying Internet ConnectionStep 1 Login to the router’s configuration page and click on the

Section 5TroubleshootingFor Cable Modem Users OnlyStep 1 Log into the router’s LAN Setting page and click WAN.For DSL Users OnlyStep 2 At the PPPoE se

For Cable Modem and DSL UsersStep 1 Power off the Cable/DSL modem, router, and computer and wait for 5 minutes.Step 2 Turn on the Cable/DSL modem and

Section 1Connecting the RouterNote: Prior to connecting the router, be sure to power off your computer, DSL/Cable modem, and therouter. You should set

Section 2Verify Connection to RouterStep 1 Go to Start, Run, type command (for Windows 95/98/ME) or cmd (for Windows 2000/XP) andclick OK. You will se

Step 5 Type ipconfig/renew and press Enter. You should get an IP address of 192.168.1.x (where x isa number between 2 - 254). Proceed to Section 3, Co

Step 8 After your IP address is released, click Renew. You should get an IP address of 192.168.1.x(where x is a number between 2 - 254). If you don’t

Step 3 Click Next at the router’s Setup Wizard.Note: If you don’t see the Setup Wizard, click on the b

Step 6 You may change the router’s LAN settings or just click Next to keep the default settings.Step 7 The router will now auto-detect what type of WA

Step 8b For Fixed IP address, enter the values provided by your ISP and click Next. Proceed to Step 9.Step 8c For PPPoE to obtain IP automatically, en

Step 8d For PPPoE with Fixed IP address, enter the User Name and Password required to get onlineand the IP address provided by your ISP, and click Nex