Airlink101 AEN-U25W Manual do Utilizador Página 1

2.5” USB 2.0 Enclosure Box Model # AEN-U25W User’s Manual Ver. 2.0

10 Step 5 Click Next to install the driver. Step 6 Click Finish to complete the driver installation.

11 4. Installation Verification To verify your installation, please follow the steps below. 4.1 Windows 98SE Go to Control Panel > System > D

12 4.2 Windows ME/2000/XP Go to Control Panel > System > Device Manager and look for USB Mass Storage Device under Universal Serial Bus control

13 4.3 Mac OS 10.x Go to Apple System Profiler > Devices and Volumes. If you see the Enclosure Box listed under USB Information, you have success

14 5. Hard Drive Usage Now you are ready to use the attached hard drive as an external storage device. A brand new hard drive must be formatted and p

15 Under Mac OS Drag the corresponding USB disk icon that represents the hard drive to the trash can. When prompted, click OK and unplug the Enclosur

16 7. Specifications Standards • USB2.0 HDD Support • 2.5” IDE HDD Ports • 1 Mini USB 2.0 Type B receptacle • 1 Power port Power Mode • Bus-

17 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com * A

2 Table of Contents 1. Introduction...

3 1. Introduction Thank you for purchasing this 2.5” USB 2.0 Enclosure Box. The Enclosure Box provides an easy way to add removable disk storage spac

4 2. Hard Drive Installation This section provides instructions on how to install a hard drive to the Enclosure Box. Step 1 Use the provided screwd

5 Step 3 Remove the bottom cover in the same manner. If you find it hard to lift the plastic holder, press it slightly inward. Step 4 Unscrew the t

6 Step 5 Attach a 2.5" hard drive to the circuit board's IDE connector with the label of the hard drive facing up. Make sure the IDE pins ar

7 Step 7 Turn the plastic holder over. Use the provided screws and the screws removed in Step 4 to secure the hard drive onto the holder. Step 8 Re

8 3. Driver Installation for Windows 98SE This Enclosure Box supports Plug-and-Play for Windows ME, 2000, XP, and Mac OS. If you are using Windows 98

9 Step 3 Select Search for the best driver for your device (Recommended) and click Next. Step 4 Select the Specify a location check box and click B