Airlink101 APO1000 Manual do Utilizador

Wireless G 2.4GHz 500mW Outdoor AP Model: APO1000/APO1010 Quick Installation Guide V.1.0

9 Step 5 : ESSID Settings Click Wireless -> Virtual AP Setup, and then VAP Setup page appears. Click “Edit” and then VAP0 Setup page appears. Set

10 Enter the WEP key information required in the WEP settings field, and the same information will also be used to set up devices which will th

11¾ Setup In WDS Mode Step 1 : Mode Confirmation Ensure the Operating Mode is currently at WDS mode; the web management UI can be viewed at the

12Step 3 : LAN IP Settings Click System -> LAN, and then Network Setup page appears. Enable “Static IP” and “DNS”, and enter the related informati

13 Setting WDS link, you need verify “Peer's MAC Address”, “Channel” and “Security Type” first. The “Channel” and “Security Type” must be the

14¾ Setup In CPE (Customer Premises Equipment) Mode Step 1 : Mode Confirmation Ensure the Operating Mode is currently at CPE mode; the web ma

15 Step 3 : LAN IP Settings Click System -> LAN, and then LAN Setup page appears. Enter the “IP Address” and “IP Netmask” of the LAN Setup. Step

16Enable “Static IP”, and then enter the related information (Default WAN IP is 192.168.1.254) Click Save button to save the settings. Step 6 : Si

17Click Select button of the AP00, and related information will display in Wireless General Setup page. Enter the information required in the Wirele

18¾ Setup In Client Bridge + Universal Repeater Mode Step 1 : Mode Confirmation Ensure the Operating Mode is currently at Client Bridge + Unive

1Preface The 802.11 b/g compliant Airlink101® APO1000/APO1010 is an outdoor high power wireless access point that can be used for five different pur

19 Step 3 : LAN Settings Click System -> LAN, and then LAN Setup page appears. Enter the “IP Address” and “IP Netmask” of the LAN Setup. Step 4 :

20Step 5 : Site Survey Click Wireless -> Site Survey, and then Station Site Survey page appears. The system will automatically scan and display th

21Click Wireless -> AP Setup, and then AP Setup page appears. Setup the broadcast SSID for easy identification of the system when device is trying

22 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Theo

2 ¾ APO1000 Front Panel Rear Panel 1. Reset Button : System reboot button press until LED flashed and release for system reboot or for rese

3¾ APO1010 Front Panel Rear Panel 1. Reset Button : System reboot button press until LED flashed and release for system reboot or for rese

4 Please follow the steps mentioned below to install the hardware of APO1000/APO1010 : ¾ APO1000 Front Panel Rear Panel Î Connect N-type ante

5 APO1000/APO1010 supports web-based configuration. Upon the completion of hardware installation, APO1000/APO1010 can be configured through a PC or

6  System Login The network manager Login Page then appears. Enter “root” for user name and “default” for password, and then click OK to login to t

7 APO1000/APO1010 is a multiple mode system which can be configured either as a gateway or an access point as desired. This section provides a step-

8 There can change root and admin manager account. Enter a new password, and verify it again in the New Password and Check New Password field respec